Categories: In the Bedroom

3 Key Reasons Why Mattresses Can Cost So Much

Today we are going to take the time to discuss some of the reasons that mattresses cost so much money.

Mattresses Prices Are Expensive Because Much Of Their Raw Materials Are Derived From Petroleum

Key mattresses components have relied on polyurethane foam for decades for their comfort and padding. In days past foam was cheap and oil costs were low hovering between $10.00 and $20.00 a barrel. Mattresses prices have gone up as the increased cost of goods composed from crude oil has hit record highs. A barrel of crude oil as of 4/2/08 rose to $118.30 tripling its wholesale cost in just the last few years.

In addition, the industry still has not recovered from the TDI shortage after Hurricane Rita damaged the Lyondell Chemical plant, which permanently closed down production at its Lake Charles, Plant. Toluene diisocyanate (TDI) is an isocyanate used in the manufacturing of polyurethane’s designed for flexible foam purposes. The result of the closed facility was foam allotments and increased foam prices to mattress manufactures.

Shipping the raw materials needed to make a mattress has also become more expensive. Something mattress consumers may have overlooked is that there are several points in time where the mattress will be transported by diesel trucks. Trucks operating on fuel costing at the time of this deadline around $4.00 a gallon when just a couple of years ago fuel was 1/3 that price.

It’s also important to understand that transporting by truck takes place throughout several different points of mattress production. It starts with the raw materials being shipped to the factory for assembly, from the factory to the retailer, and from the retailer to the customer’s bedroom. Some might joke that these mattresses already have a lot of mileage on them.

Mattress Costs Have Increased From The Implementation Of A Mandatory Mattress Regulation.

This mattress law is referred to as 16 CFR Part 1633 and was put in place by the Consumer Product Safety Commission (CPSC).

This new law forced many smaller manufactures to shut their doors when they were unable to comply with the required performance standards. This has resulted in fewer competitors in the mattress manufacturing industry. The government’s new mattress standards were designed to limit the heat discharge during a mattress fire and save approximately 350 lives a year. The additional costs forced many smaller mattress manufacturers out of business.  With less competition, giant mattress companies have greater rules over the mattress industry and are able to make more money for their investors.

Another way the new law has affected mattress prices is the forced expense of new research and development along with mandatory prototype mattress testing at the manufacturer’s expense. Our high-priced mattress nightmare continues for the mattress engineers. Mattress manufacturers must be able to trace each mattress through the assembly process from beginning to end via a required one-mile long paper trail.

Most small mattress manufactures were already working on a shoestring budget. Obvious additional work comes from 2 areas; added production complications, administrative paperwork. Both necessitate more attention, time, and more maintenance resulting in higher payroll costs. Where will these costs be covered? The answer is really hard to say because the law itself will do little if anything to generate growth in retail mattress sales volume.

Steel Costs Have Risen Between 25 To 45 Percent Across The Industry Causing Mattress Prices To Skyrocket.

With demand running high and supply running low it is no wonder we keep seeing steel prices rising so fast.  Most mattresses and box springs consist of approximately 40 percent makeup from steel coil spring and border rod construction. The wholesale cost in recent days from steel suppliers has seen a jump of nearly 20%.

Three Bonus reasons

Labor Costs Have Risen

The cost to build retail-building space has risen and associated rent payments to make the related mortgage payment of ownership. It takes a lot of square footage to display mattresses.

Associated Insurance Rates Have Increased

In Summary

  • When you add the highest Oil prices ever.
  • Plus the highest steel prices ever.
  • Plus the highest foam prices ever.

You get a high-priced mattress.

What do you think about current mattress prices?

Contact STL Beds Now

You can also contact us by filling out the form below. Make sure to fill in as many fields as possible so we can respond to you with the most accurate information!

Douglas Belleville

Doug Belleville and his father Dave own and run STLBeds - a specialty sleep store located in Arnold, MO. The staff at STLBeds is highly educated about sleep, comfort and their special sleep products. STLBeds only carries high quality mattresses and bed-related products. You won't find the brand names here - click here to find out why!

Recent Posts

Innovative Bed Designs For Small Spaces: Maximizing Your Bedroom

Estimated reading time: 7 minutes Maximizing the space in a small bedroom can feel like…

4 weeks ago

Choosing The Best Bed Frame For Frequent Movers

Estimated reading time: 7 minutes If you move often, moving furniture is probably one of…

3 months ago

Choose Hues To Enhance Relaxation And Sleep Post-Relocation

Estimated reading time: 6 minutes Amidst the chaos of moving to a new home, it’s…

4 months ago

How To Efficiently Dismantle And Move Your Bed Frame

Estimated reading time: 6 minutes Today we are going to discuss "How To Efficiently Dismantle…

6 months ago

Will A Latex Mattress With Wool And Cotton Sleep Hot?

Estimated reading time: 4 minutes Today we are here to discuss latex mattresses and more…

6 months ago

Independent Pocketed Coils

Today we will be discussing Independent Pocketed Coils or pocket coils as they are also…

6 months ago

This website uses cookies.