Description
1-Piece Super Heavy Duty Low Profile 5″ Tall Springless Box Spring
Walk the Super Duty Low Profile Springless Box Spring (Twin) easily through your home and assemble it in your bedroom.
What It Does
In the case of the STL Beds low profile springless boxspring, it has the same exact construction as the standard height, but it is shorter by 3 1/4 inches. In fact, the stability of the base and its support is exactly the same as well. This lower profile design is a perfect option for anyone at any time who wants to reduce the total height of their bed. The finished height of your mattress set is an important choice to make and can be the difference between easily getting in and out of the bed or not.
Today’s mattresses are extremely thick and when you add in the height of your bed frame, the bed itself, and boxspring/foundation it is easy to see why there is such a great demand for low-profile box springs. By simply decreasing the height of your mattress, with a thinner foundation, the problem of height can be eliminated. Low-profile foundations are approximately 3-4 inches shorter than standard 8-9 inch tall box springs. This is one of the very best ways to get your mattress to sit closer to the ground.
What Kind Of Mattress Can I Use This Box Spring With?
The STL Beds Quick Assemble Low Profile 5″ tall Super heavy-duty foundation can be used underneath virtually any type of mattress including softside waterbeds, memory foam beds, all bed in a box type of mattresses, latex mattresses, coil spring, pocketed coil beds, and hybrid beds. The slats are spaced 2 3/4 apart to provide the necessary support for all of the listed mattresses.
Every mattress should have a sturdy foundation and the very best mattresses require one. A great support system needs to be resistant to dipping and sagging. It is extremely important that your mattress has the necessary required support for long life, warranty compliance, and comfortable sleep.
Will It Fit? Simply carry the box with contents into your room of choice, pull out the pieces, and lay them out according to instructions. Take it in the room you thought you couldn’t get a one-piece boxspring into and assemble it according to the directions.
Compare Super Duty To The Rest
Ours: We do not sacrifice building materials, strength, and durability for profitability. The hand-crafted Super Heavy Duty knocked down, solid wood foundation is built exclusively for STL Beds to the most rigid of standards. You can’t beat the value. The very best construction for the same or less than most brand name boxsprings but with 2-3 times the quality. That is no joke! We stand behind our quality and encourage you to compare this to any big brand name boxspring or foundation. Why?
Because our super heavy-duty wood foundation starts by doubling the total number of wooden slats to 14 you will receive with your new system. Each slat is at least 2 1/2 inches wide and made from Canadian spruce and fir. No matter what size you choose, each corner will bolt securely together with a large carriage bolt to secure the mainframe together. Then it is reinforced with two wooden dowel rods. All super duty foundation sizes include a solid wood I-Beam running head to toe that includes extra support blocks for added strength. NOTE: California King, Eastern King, Queen, and Full all include two super-strong I-Beams.
Compare this to our competition who typically uses nothing more than a 1 3/8 wide, flimsy piece of wood for center support with no reinforced support anywhere. STL Beds adds additional wood blocks for extra side strength down each side of the foundation for seating. We only use solid wood to provide the optimal support for you and yours and your new or old mattress.
Theirs:
- The main structural frame of most box springs and foundations built today use only staples to hold them together,
- Competitors rarely use more than 7 to 8 wood support slats.
- Their wooden slats are usually only 1 1/2 inches wide. In most cases, we use twice as many slats and our slats are 2.5 inches wide.
- They do not include middle or side strength reinforcement which is necessary for sturdy and strong seat edge support.
- Most brand-name foundations are supported by a flimsy wire support grid. In fact, the only advantage of a grid wire system is that they are lightweight. NOTE: This is NOT a plus. The lack of quality materials makes them In susceptible to bending, uneven support, and a weak frame structure.
What Kind Of Mattress Can I Use This Box Spring With?
The STL Beds Quick Assemble High Profile 8.25″ tall heavy-duty foundation can be used underneath virtually any type of mattress including the heaviest applications like memory foam beds, all bed in a box type of mattresses, latex mattresses, coil spring, pocketed coil beds, and hybrid beds. The slats are spaced 2 3/4 apart to provide the necessary support for all the listed mattresses.
The foundation comes with a luxurious encased cover that completes the look of your mattress set. The neutral, white-colored cover allows for it to coordinate with virtually any mattress color and design. The zippered encasement fully encases the foundation for a beautifully tailored look.
Your new knockdown mattress support system comes with all the necessary parts for a trouble-free assembly. The estimated time to remove the packaging and assemble is 15 – 30 minutes. The foundation comes in pieces making it a one-person job. Carry the foundation into the desired room piece by piece or in the box. This is a smart alternative to the traditional two-person carry of a traditional bulky box spring. No tools are needed to turn this dream into a reality. Everything you need comes standard.
This Knock Down (KD) Wood Mattress foundation is shipped directly to your house. This springless box spring can be knocked down and moved at your convenience, making it easier to move than your ridged one-piece box spring or costly split box foundations. It is ideal for tight spaces such as upstairs where your traditional foundation or box spring may have fitment issues.
Reviews
There are no reviews yet.